ContactSiteMapSearch Print

Schindler 5300 Technical Specifications

blank
Home

Exceptionally smart

The cabin of the Schindler 5300 is spacious. We specifically designed the elevator to minimize the space required for the technical equipment. With traction belts, our latest development, standardized shafts are able to hold cabins that are up to 47 cm wider and accommodate up to five additional passengers in conventional shafts. An improvement that weights in, especially in the cabins with a capacity of 800 kg and 1000 kg and centrally opening doors.

Shaft dimensions*
width x depth
Previous
Capacity
New
Capacity
Previous
Passengers
New
Passengers
1500 x 1600 mm
450 kg
535 kg
6
7
1500 x 1650 mm
450 kg
535 kg
6
7
1600 x 1600 mm
450 kg
625 kg
6
8
1600 x 1650 mm
450 kg
625 kg
6
8
1600 x 1750 mm
630 kg
675 kg
8
9
1800 x 1700 mm
630 kg
800 kg
8
11
2000 x 1700 mm
630 kg
1000 kg
8
13
1650 x 2450 mm
1000 kg
1125 kg
13
15
     
*Applicable to cars with one-sided entrance
An outstanding feature of the Schindler 5300 is the headroom height. It can be reduced to 2900 mm without restrictions. Unsightly structures on the roof are not required. As a result, you have more space to use. Also, this elevator requires no machine room. The control unit is installed directly in the doorframe. A separate control cabinet is not necessary, all of which saves space and effort.

Key Figures

Capacity
535 kg / 625 kg / 675 kg / 800 kg / 1000 kg / 1125 kg // 7 – 15 passengers
Travel height
max. 30 m, max. 10 stops
One-sided entrance T2
535 kg, 625 kg, 675 kg, 1125 kg
One-sided entrance C2
800 kg, 1000 kg
Two-sided entrance
535 kg, 625 kg, 675 kg, 1125 kg
Door width
800 mm, 900 mm
Door height
2000 mm, 2100 mm, 2300 mm
Drive
gearless/frequency-controlled
Speed
1.0 m/s
Control
Push-button control, down collective and selective collective control
Interior
Three decor lines
  
Download brochure (pdf. 2.2Mb)
blank
© 2012 Schindler Management Ltd. - Use of this website as stated in our legal statement.